Gap Sand is a special blend of graded fine sandsand additives designed to lock into place alltypes of brick and block paving.
STEP 1 Lay pavers as per manufacturer’s instructions. Sweep Gap Sand into all joints using a stiff broom, until all gaps are filled.
STEP 2 Work a vibrating compactor, rubber mallet or similar piece of equipment over the entire paved area to assist the flow of filler into the joints and to ensure the joints are firm.
STEP 3 Thoroughly sweep the paved surface, topping up where necessary and remove all excess surface sand.
STEP 4 Mist spray the paved surface ensuring that all areas receive a thorough wetting. Avoid heavy spraying or flooding of areas. When Gap Sand is dry and firm, paving is ready for traffic