Jointfill Sand

  • Fine graded sand to fill gaps in brick & block paving
  • No cement additives
  • Excellent for use on pavers bedded on sand base
  • Covers approx 3.5m2 per 20kg bag (3mm gap, brick shaped pavers)



Paver Jointfill

General information

Jointfill Sand is a blend of graded fine sands designed to fill gaps in all types of brick and block paving.


STEP 1 Lay pavers as per manufacturer’s instructions. Pour bag contents onto pavers ensuring the sand remains dry. Sweep Jointfill Sand into all joints using a stiff broom, until all gaps are filled.    

STEP 2 Work a vibrating compactor, rubber mallet or similar piece of equipment over the entire paved area to assist the flow of filler into the joints and to ensure the joints are firm.

STEP 3  Thoroughly sweep the paved surface, topping up where necessary and remove all excess surface sand. Paved area is then ready for traffic.

Available sizes


Also available in bulk.