Gap Sand

  • Quick & easy to use
  • Forms a workable yet stable joint between pavers
  • Inhibits weed & insect infestation
  • Minimises paver distortion
  • Covers approx 3.5m2 per 20kg bag (3mm gap, brick shaped pavers)

Applications

Paver Jointfill

General information

Gap Sand is a special blend of graded fine sandsand additives designed to lock into place alltypes of brick and block paving.

Instructions

STEP 1 Lay pavers as per manufacturer’s instructions. Sweep Gap Sand into all joints using a stiff broom, until all gaps are filled.

STEP 2 Work a vibrating compactor, rubber mallet or similar piece of equipment over the entire paved area to assist the flow of filler into the joints and to ensure the joints are firm.

STEP 3 Thoroughly sweep the paved surface, topping up where necessary and remove all excess surface sand.

STEP 4 Mist spray the paved surface ensuring that all areas receive a thorough wetting. Avoid heavy spraying or flooding of areas. When Gap Sand is dry and firm, paving is ready for traffic

Available sizes

20kg

Also available in bulk.